BWVFN - 235-00 WHITE BLOCK-OUT II ACRYLIC PRIMER-SEALER STAIN KILLER

  • MSDS: BWVFN
  • Manufacturer: BRUNING PAINT CO INC
  • Product Name: 235-00 WHITE BLOCK-OUT II ACRYLIC PRIMER-SEALER STAIN KILLER
  • National Stock Number: 8010-00F038546
Product Identification

Product ID:235-00 WHITE BLOCK-OUT II ACRYLIC PRIMER-SEALER STAIN KILLER
MSDS Date:06/01/1993
FSC:8010
NIIN:00F038546
MSDS Number: BWVFN

Responsible Party
BRUNING PAINT CO INC
601 S HAVEN ST
BALTIMORE, MD 21224-4347
US

Emergency Phone: 410-342-3636/3641

Info Phone: 410-342-3636/3641

Cage: EO376

Contractor
KYANIZE PAINT
BALTIMORE, MD 21224 US

Telephone: 800-368-2076

Cage: 85520

Ingredients

ZINC OXIDE *95-1*

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 2.39%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM FUME

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:REPORTS HAVE ASSOCIATED REPEATED &
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS W/PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:REPORTS HAVE ASSOCIATED REPEATED & PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS W/PERMANENT BRAIN & NERVOUS
SYSTEM DAMAGE.

First Aid

First Aid:EYES/SKIN: FLUSH W/LUKE WARM WATER FOR 15 MINS. INHALATION:
REMOVE TO FRESH AIR. RESTORE BREATHING IF REQUIRED. INGESTION:
NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. IF CONSCIOUS
& ALERT, VOMITING, SHOULD BE INDUCED. GIVE 1-2 TABLESPOONS OF
SYRUP/IPECAC FROM A PHYSICIAN. IF SYRUP ISN'T AVAILABLE INDUCE
VOMITING BY PLACING FINGERS INTO THE BACK OF THE THROAT. (SEE SUPP)

Fire Fighting

Flash Point Method:TCC
Fire Fighting Procedures:CONTAINERS EXPOSED TO INTENSE HEAT FROM FIRES
SHOULD BE COOLED W/WATER TO PREVENT VAPOR PRESSURE BUILDUP WHICH
COULD RESULT IN CONTAINER RUPTURE.

Accidental Release

Spill Release Procedures:DON'T FLUSH TO SEWER, WATERSHED/WATERWAY.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING. DON'T STORE >120F.
DON'T TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF
REACH OF CHILDREN.
Other Precautions:AVOID PROLONGED/REPEATED BREATHING OF VAPORS. DON'T
BREATHE VAPORS/SPRAY MIST. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING & INHALING THE CONTENTS MAY BE HARMFUL/FATAL.

Exposure Controls

Respiratory Protection:OUTDOOR/OPEN AREAS: NIOSH/MSHA APPROVED
MECHANICAL FILTER RESPIRATOR. RESTRICTED VENTILATION AREAS:
NIOSH/MSHA APPROVED CHEMICAL-MECHANICAL FILTERS. CONFINED AREAS:
NIOSH/MSHA APPROVED AIR LINE TYPE R ESPIRATORS/HOODS.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST IN VOLUME & PATTERN TO KEEP
TLV BELOW ACCEPTABLE LIMIT.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
RESPIRATORY PROTECTION MAY ALSO BE NECESSARY IN ANY LATER MANUFACTURING
OPERATIONS IN WHICH THIS PRODUCT MAY BECOME AIRBORNE IN THE FORM OF
VAPOR/DUST. FIRST AID CONT'D: DON'T LEAVE UNATTENDED. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Chemical Properties

Boiling Pt:B.P. Text:212-490F
Vapor Pres:17
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN BU-AC
Percent Volatiles by Volume:68.8

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Stability Condition to Avoid:FREEZING
Hazardous Decomposition Products:CO, CO2 & OXIDES OF NITROGEN

Disposal

Waste Disposal Methods:DISPOSE OF IAW/LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.